Use the links to data sheets below to select the correct product from the Gypsol range that best suits the needs of your project.
A general purpose screeding system. This is the most commonly used material in our range.
Gypsol HTC (High Thermal Conductivity) is designed for use with underfloor heating and cooling systems
An ultra thin screed for bonded and un-bonded applications at minimum depth of 15mm.
A thin screed suitable for bonded and un-bonded applications down to 20mm minimum depth
Extra strength material for use in heavy-duty applications, where loading is likely to be higher than normal
Specially formulated and tested for use in timber frame and over timber supported floors including acoustic conditions
Designed to offer a cost effective, energy efficient and environmentally friendly whole house heating solution. Ideal for the mass house market or single dwellings
Pre-blended product supplied in 25kg bags for mixing on site. Ideal where very small quantities are required, or access for readymix lorries is not possible.
For use where screeds are to be pumped over very long distances or high buildings of 10 stories and above.
Designed for use in modular construction to allow early movement of units. Also for light weight steel frame and Lewis Decking